FarmTek - Configure Farm Timer for Timer Node

Follow directions below to configure Polaris (FarmTek) Multi-event Timer

Using the farmtek polaris timer requires basic configuration of the timer equipement to prepare it to send data to ShowGrounds.

Here are the configuration steps:

1. Press “Setup”

2. Press “Previous Choice” until screen reads “Press ENTER to Exit Setup”

3. Press “Eyes ON”

4. Press “Next Choice” until screen reads “Printer Type”

5. Press “Enter”

6. Press “Next Choice” until screen reads “*ASCII Float/Hrn”

7. Press “Enter”

8. Press “Next Choice” until screen reads “4800 Baud”

9. Press “Enter”